Horizontal soft bearing balancing machine for balancing of drive shafts. The machine has a maximum capacity of 300 kg and is available with two, three or four pedestals. The electronic unit allows displaying the unbalance values simultaneously on two, three or four planes. The motor is driven by an inverter and allows balancing at different speeds up to 6000 RPM. The telescopic tunnel shaped safety guard is sliding on rails on the floor and encloses completely the machine when the rotor is spinning.
|Number of pedestals||2 -3 - 4|
|Nominal capacity||300 Kg|
|Maximum shift diameter||200 mm|
|Shaft flanges diameter||50 - 220 mm|
|Maximum balancing speed||6000 RPM|
|Maximum sensitivity||1 µm|